The beautifully shaped device for failure and yield monitoring with a TFT color touch screen and a smaller LCD display.
Solar-Log 1200 is compatible with all current inverters. It is possible to connect several inverters for maximum of two manufacturers and a total plant power of 100 kWp.
Solar-Log™ Easy Installation
The installation and initial setup is automatic. The inverter detection and the Internet logon start immediately. The installation status is shown on the LCD Display. The manual configuration of the Solar-Log™ can be performed via the WEB interface. Easy Installation is compatible with the Solar-Log™ WEB “Commercial Edition” and “Classic 2nd Edition”.
Self-consumption can be measured and displayed as a graph with a energy meter. Smart Energy logics activate and deactive individual appliances depending on the amount available energy.
TFT-Touch-Display and access to Solar-Log™
The Solar-Log™ can be operated from a computer with a web browser or directly via the device’s TFT-Touch-Display. The graphical reports of yield data are visualized on the color TFT-Touch-Display and via the web browser. Remote access is possible with the Solar-Log™ WEB “Commercial Edition”.
Number of inverters / devices: just one manufacturer per bus, total maximum 100 inverter / devices, maximum plant size 100 kWp.
Inverters can be connected via an RS485/422 and a RS485 interface or an Ethernet connection.
Note: There is a temporary firmware issue causing the Huawei quad trackers to not be compatible with the Solar-Log monitoring range.