Steca - Steca Smart Energy Manager
Smart Energy Manager for coolcept, coolcept-x, coolcept³, coolcept³-x, StecaGrid 8000+ 3ph and 10000+ 3ph
The feed-in management solution
The StecaGrid SEM offers different options of realising feed-in management with a photovoltaic system. A ripple control receiver from the relevant distribution grid operator can be connected. From firmware version 3.0, the feed output at the grid connection point can be limited to an adjustable value, or the ripple control signal can be switched to the relay output. The individual operating modes are selected and defined via the free StecaGrid User PC software. Up to ten inverters can be connected to the StecaGrid SEM via the RS 485 interface.
StecaGrid SEM can be installed in the switching cabinet right next to the ripple control receiver. The casing features a dimensioning typical for switching cabinets and can be mounted onto a top-hat rail. Its width is 4 HP. Direct power supply at 230 V. A mains adapter plug or an external direct current power supply are not required.
Easily accessible service interface
All connected StecaGrid inverters can be accessed via a USB interface on the StecaGrid SEM. Connection to a PC is possible via a standard USB cable. The interface is on the front side of the casing – the cover does not need to be removed in the switching cabinet.
The StecaGrid SEM can be configurated via the StecaGrid User Software (from version 3.0). The sofware is available at www.stecasolar.com from free download.