Product Details

Product Details

Renusol - ConSole+ (incl. Mounting material and U-Profile)

CategoryPV Mounting
SubcategoryFlat Roof Tray
Segen Part NoREN-520075-K
Supplier Part NoREN-520075-K
DescriptionConSole+ (incl. Mounting material and U-Profile)
The Console+ is currently not supported by the Segen design tool.  Please refer to the Renusol design software here for system designs# Please note: you will need to register to access the Renusol design software "Web Configurator#"

The ConSole+ provides an angle of 15 degrees

The ConSole assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees with out roof penetration# Most commercially available framed standard PV modules fir on the ConSole#

The ConSole is weighed down with ballast #gravel, paving slabs, etc# in order to resist the windloads# The necessary weight of the ballast depend on the height of the building, its lo#ation and the condition of the ground and the wind and snow loads# Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual#

Colour: black
Suitable for flat-roof- and ground mounting installations
For framed PV-modules

Technical Data:
Material: HDPE, Aluminium and stainless steel
Weight: 7,900 kg
Max# module length: 1580-1730 mm
Holes gap - width: 895-1014 mm
Holes gap - length: 690-1180 mm

Other Contents:
1 x 500075 ConSole+
2 x 400005 ConSole U-Profile 1035 mm
4 x 900027 Hexag# screw DIN933-M6x20 A2-70
4 x 900028 Washer DIN9021-6,4-A2
4 x 900029 Self-locking hexag# nut DIN985-M6-A2
4 x 900106 ConSole Clip
4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8

Designer note: The Renusol Console+ is not compatible with the Solar World PV modules, SW-250-M-AB and SW-250-P

Keywords: REN520075K, PV Mounting, Flat Roof Tray

Product Documents
Brochure - Company Profile
Brochure - ConSole, Console+ Product
Data Sheet - ConSole PLUS Data Sheet